| Availability: | |
|---|---|
| Quantity: | |
M-100
Mepcato
on-Line
1 Year
6.5m
95L/Min
Motor
PP+Fiberglass
CE
Input: 130W Output: 100W
Plastic
3.5m
blue
4 pc in a brown carton
portable, light, utility
Residual water drainage, dewatering
Mepcato
95L/min
clean water and slight dirty water
0~40ºC
motor
available
Build-in repeatable thermal protector
water transfer, water drainage, dewatering, irrigation
16x13.9x27cm
95L/min
China
3/4inch, 1inch
40 ºC
100W
Mechanical Seal and Oil Seal
M-100 Low Level Submersible Utility Pump
Suitable for clean water, slight dirty water and marine equipment
For domestic emergencies where a small area must be drained to the lowest level possible
Ideal for complete drainage of flat surfaces: basement, cellar, rooftops, garages, pools
Apply to fish tank and water tank cleaning
Pumps residue water down to 2 mm
New A type of Auto-Manual switch can match with M-100 or M-400
Float switch models MF-100 and A type new switch model M-100A
M-100A switch: Automatic operation (A): The integrated float switch starts and stops the pump automatically when the indicator is positioned on "A".
Manual operation (M): To start the pump, lift the knob positioning the indicator on "M".
Introduction of M-100 Submersible Pump
The M-100 series submersible pump is designed for residue dewatering from basement, garage, tank, parking lot, pond, pool, sump or areas where must be drained down to an extremely low level.
Key Structural Features
Ultra-low suction design: drain water down to 2mm
Compact body, light weight: suitable for nallow space, easy to carry
Durable and non-corrosive reinforced housing
Built-in motor thermal overload protector: avoiding motor burnout from overheat
Mechanical seal + oil seal to make double waterproof protection
Automatic control optional: MF-100 (automatic with floater switch), M-100A (manual/automatic operation with vertical float switch)
Applications
Household application:
•Drain residual water in basement, underground parking lot, garage, cellar
•Remove water from ponds, pools, tanks, sumps
Construction & Engineering Projects
•Remove water from foundation floors, pits sediment tanks, lift pits
•Clean water left on finished construction ground after decoration or grouting work
Municipal & Environmental Emergency
•Emergency dewatering after urban waterlogging and flood disasters
•Drainage for utility maintenance and repairs
| Model | M-100 Series | |
Pumping Fluid | Type of Fluid | Clean water |
| Fluid Temperature | 0~40℃ | |
Pump | Impeller | Semi-vortex, PPO |
| Shaft Seal | Mechanical Seal+Oil Seal | |
| Casing | PP+Fiber Glass | |
| Bearing | Deep Groove Ball Bearings | |
Motor | Type, Pole | Dry Type Submersible Induction Motor, 2-Pole |
| Insulation | Class B | |
| Phase/Voltage | Single or three phase/110V,220-240V | |
| Starting Method | Capacitor Run | |
Protection Device | Repeatable Thermal Protector | |
| Lubricant | Turbine Oil VG32 | |
| Shaft | Stainless Steel | |
| Cable | 3m with Plug | |
Model | Input Power | Output Power | Outlet | Voltage | Max Flow | Max Head | L x W x H | ||
| Watt | Inch | V/Hz | L/min | m | cm | cm | cm | ||
| M-100 (Manual) | 130 | 100 | 3/4;1 | 220V/50Hz | 95 | 6.5 | 16 | 13.9 | 27 |
| MF-100 (Auto) | 18 | 13.9 | 30 | ||||||
| M-100A (Auto/Manual) | 23.2 | 13.9 | 28.5 | ||||||