content is empty!
Availability: | |
---|---|
Quantity: | |
M-250
Mepcato
on Line
1 Year
10m
180L/Min
Motor
PP+Fiberglass
CE
Input:500W Output: 250W
Submersible Pump
Plastic
3.5m with plug
Build-in Repeatable Thermal Protector
Orange
Single brown box
Powerful, compact, non-corrosive
Mepcato
clean water and sea water
0~40ºC
motor
available
sea fish breeding, water circulation, water drainage
China
1.25/1.5 inch
Italy double face mechanical seal
M-250 Series Submersible SEA WATER Pump
Compact and non-corrosive reinforced plastic housing
Adopt Italy mechanical seal specially for sea water use
SUS316 motor housing and shaft for sea water corrosion resistance
Built-in motor thermal overload protector
M-250A auto-manual float switch:
Automatic operation (A): The integrated float switch starts and stops the pump automatically when the indicator is positioned on "A".
Manual operation (M): Lift the knob positioning the indicator on "M",the pump will not have automatic function.
Suitable for sea fish breeding: aquaculture sites and marine equipment
Apply for circulate water in garden ponds, sprinkler for vegetation of pump
Ideal for drainage of flat surfaces: basement, cellar, rooftops, garages, pools
To drain the accumulated water for civil and architecture engineering
M-250 Series Submersible SEA WATER Pump
Compact and non-corrosive reinforced plastic housing
Adopt Italy mechanical seal specially for sea water use
SUS316 motor housing and shaft for sea water corrosion resistance
Built-in motor thermal overload protector
M-250A auto-manual float switch:
Automatic operation (A): The integrated float switch starts and stops the pump automatically when the indicator is positioned on "A".
Manual operation (M): Lift the knob positioning the indicator on "M",the pump will not have automatic function.
Suitable for sea fish breeding: aquaculture sites and marine equipment
Apply for circulate water in garden ponds, sprinkler for vegetation of pump
Ideal for drainage of flat surfaces: basement, cellar, rooftops, garages, pools
To drain the accumulated water for civil and architecture engineering
Model | M-250 Series | |
Pumping Fluid | Type of Fluid | Clean Water and Sea Water |
Fluid Temperature | 0~40℃ | |
Pump | Impeller | PA+Fiberglass |
Shaft Seal | Italy Double Face Mechanical Seal | |
Casing | PP+Fiberglass | |
Bearing | Deep Groove Ball Bearings | |
Motor | Type, Pole | Dry Type Submersible Induction Motor, 2-Pole |
Insulation | Class B | |
Phase/Voltage | Single or three phase/110V,220-240V | |
Starting Method | Capacitor Run | |
Protection Device | Repeatable Thermal Protector | |
Lubricant | Turbine Oil VG32 | |
Shaft | SUS316 Stainless Steel | |
Cable | 3.5m with Plug |
Model | Input Power | Output Power | Outlet | Voltage | Max Flow | Max Head | L x W x H | ||
Watt | Inch | V/Hz | L/min | m | cm | cm | cm | ||
M-250 | 500 | 250 | 1.25; 1.5 | 220V/50Hz | 180 | 10 | 18.3 | 17.7 | 33.9 |
MF-250 | 25.8 | 17.7 | 33.9 | ||||||
M-250A | 24.5 | 17.7 | 33.9 | ||||||
M-250B | 23.8 | 17.7 | 33.9 |
Model | M-250 Series | |
Pumping Fluid | Type of Fluid | Clean Water and Sea Water |
Fluid Temperature | 0~40℃ | |
Pump | Impeller | PA+Fiberglass |
Shaft Seal | Italy Double Face Mechanical Seal | |
Casing | PP+Fiberglass | |
Bearing | Deep Groove Ball Bearings | |
Motor | Type, Pole | Dry Type Submersible Induction Motor, 2-Pole |
Insulation | Class B | |
Phase/Voltage | Single or three phase/110V,220-240V | |
Starting Method | Capacitor Run | |
Protection Device | Repeatable Thermal Protector | |
Lubricant | Turbine Oil VG32 | |
Shaft | SUS316 Stainless Steel | |
Cable | 3.5m with Plug |
Model | Input Power | Output Power | Outlet | Voltage | Max Flow | Max Head | L x W x H | ||
Watt | Inch | V/Hz | L/min | m | cm | cm | cm | ||
M-250 | 500 | 250 | 1.25; 1.5 | 220V/50Hz | 180 | 10 | 18.3 | 17.7 | 33.9 |
MF-250 | 25.8 | 17.7 | 33.9 | ||||||
M-250A | 24.5 | 17.7 | 33.9 | ||||||
M-250B | 23.8 | 17.7 | 33.9 |