| Availability: | |
|---|---|
| Quantity: | |
SA1100
Mepcato
on-Line
1 Year
47m
110L/min
Motor
4
CE
1100W
1.7m PVC Cable with Plug
clean water
4~40ºC
1 inch
Inverter Control Electronic Control Booster Pump

■ Permanent magnetic frequency conversion and constant pressure control, abundant and stable water supply.
Operation Conditions
• Suitable liquid: potable water or other clean or non-corrosive liquids.
• Ambient temperature: ≤+40°C
• Liquid temperature:
SA series: +4°C ~ + 40°C
SAH (Hot water series): +4°C ~ + 85°C
• Relative humidity: max 80% (RH)
• Permanent magnetic frequency conversion and constant pressure control, abundant and stable water supply.
• Energy-saving, using the highest grade IE5 motor to bring 20% higher energy efficiency than ordinary motors.
• Anti-electromagnetic interference (EMC), in line with European and American standards.
• Multi-mode variable frequency operation Constant pressure operation mode, high speed accuracy, stable water pressure. Water replenishment mode: Intelligent timed loop water replenishment. Manual mode: When the pressure sensor fails, you can set the speed manually to ensure the water demand.
• Touch control electronic display. Simple operation.
• Multiple automatic protection functions to provide a reliable water experience: drive overpressure protection / drive under pressure protection / drive overheat protection / water overpressure protection / water shortage protection / blockage protection / overload protection / anti-freeze protection / water temperature overheating protection / pressure sensor failure protection.
• Low noise: Patented air duct and drive noise reduction technology, running noise is lower.
Apartment buildings, houses, villas,
Factories, water supply systems, drinking water systems, sewage treatment facilities, supermarkets, motels, SPAs, etc.
| Model | MJD Series | |
| Inlet/Outlet Coupling | Plastic | |
Pumping Fluid | Type of Fluid | Clean Water free from solids or abrasive substances and non aggressive |
| Fluid Temperature | 4~90℃ | |
Pump | Impeller | PPO plastic Stainless Steel |
| Shaft Seal | Italy Mechanical Seal | |
| Casing | PPO | |
| Bearing | Deep Groove Ball Bearings | |
| Control method | PCB control with Indicator Light | |
| Pressure switch | USA Mirco Switch | |
| Valve (build-in) | Non-return valve | |
| Thermal protector | Build-in for water temperature check | |
| Pressure tank | Stainless Steel | |
Motor | Type, Pole | Dry Type Submersible Induction Motor, 2-Pole |
Protection Device | Repeatable Thermal Protector | |
| Frame | Aluminum Alloy Die-casing | |
| Shaft | Stainless Steel | |
| Cable | 1.7m PVC Cable with Plug | |
Model | Power | Outlet/Inlet | Voltage | Max Suction | Max Head | Max Capacity | L x W x H | Weight | |||
| watt | Inch | V/Hz | m | m | L/min | m³/h | cm | cm | cm | kg | |
| MJD200 | 200 | 1 | 220-240V/ 50Hz | 6 | 25 | 60 | 3.6 | 40 | 18 | 23.5 | 9.8 |
| MJD400 | 400 | 27 | 74 | 4.5 | 40 | 18 | 23.5 | 11.1 | |||
| MJD800 | 750 | 31 | 84 | 5 | 40 | 18 | 23.5 | 9.8 | |||
| MJD1000 | 900 | 35 | 100 | 6.3 | 40 | 18 | 23.5 | 11.1 | |||