A condensate pump removes the water that collects from air conditioners, furnaces, and dehumidifiers, pumping it up and away to a drain. It uses a float switch to detect rising water levels, which triggers a motor to activate and push the condensate through a discharge line. Unlike a dewatering pump Read More

A submersible pump works by housing a sealed, waterproof motor directly inside the fluid it moves, then using a rotating impeller to push water upward through a connected pipe. Because the motor is submerged, these pumps avoid cavitation issues common in surface pumps and are used in seawater system Read More

A sewage pump moves wastewater containing solids—like what flows from toilets—up to 2 inches in diameter, making it suitable for whole-house waste removal. A sump pump handles groundwater and clear water that collects in a basement sump basin, protecting homes from flooding. Choose a sewage pump for Read More

To calculate the pressure boost required for a booster pump, subtract your current water pressure from your desired water pressure, then add losses from pipe friction, elevation changes, and fixture requirements. Most households need a boost of 20–40 PSI, while commercial buildings often require mor Read More

To connect a condensate pump to a dehumidifier, position the pump near the dehumidifier's drain outlet, attach the inlet tubing from the dehumidifier to the pump's inlet port, run the outlet tubing to your chosen drainage point, then plug in the pump and test it with water before relying on it full- Read More